“Should I get my air conditioning tuned up?” is a fair question when the system seems to be working. The answer depends on what a tune-up really involves, and the list is rarely spelled out. This guide walks through it one item at a time, shows what is yours to do between visits and explains why spring is the right time to book. Black Plumbing Heating and Air serves Lubbock from 8215 Avenue D, and our technicians are available around the clock for air conditioning (AC) problems that cannot wait.
Why a tune-up is about prevention, not repair

A repair fixes something that has failed. A tune-up looks for wear before it becomes a failure. ENERGY STAR recommends a contractor check-up before each season, with the cooling system serviced in spring and the heating system in fall. Its reason is practical: contractors get busy once summer and winter arrive. If you book in spring, you are not competing with everyone whose system quit on the first hot afternoon.
The agency also suggests an easy way to remember: schedule visits around the spring and fall clock changes. That is a habit that costs you nothing and is easy to keep, because the clock change is already a reminder.
What the technician does, step by step
ENERGY STAR publishes a checklist of what a professional visit should cover. These are the items that apply to cooling, in plain terms, along with why each matters.
- Review thermostat settings. Settings should match comfort when you are home and savings when you are away. A schedule that no longer fits your life wastes energy.
- Tighten electrical connections and measure motor voltage and current. Loose connections can make operation unsafe and shorten the life of components. Measuring the motor’s electrical draw can reveal a motor that is working harder than it should.
- Lubricate moving parts. Friction in a motor wastes electricity and wears parts. Lubrication reduces both.
- Inspect the condensate drain. A clog can cause water damage and affect indoor humidity.
- Test system controls. The equipment should start, run and shut off correctly.
- Clean the evaporator and condenser coils. Dirty coils reduce cooling, lengthen run time and raise costs. The indoor coil sits in the air handler. The outdoor coil surrounds the condenser.
- Check the refrigerant level and adjust it. Too much or too little lowers efficiency and shortens equipment life.
- Clean and adjust blower components. ENERGY STAR says airflow problems can cut efficiency by up to 15 percent.
Each of these is something you can ask about when a technician is at your home. A good visit ends with an explanation of what was checked, what was found and what, if anything, needs attention.
What you handle between visits
A tune-up is not a substitute for basic care. The one task ENERGY STAR assigns to the homeowner is the filter: inspect, clean or replace it monthly on the air conditioner, furnace or heat pump. It says a dirty filter raises energy costs and can lead to early equipment failure. Beyond that, a few simple habits help.
- Keep the area around the outdoor unit clear. Trim plants back, and keep leaves, grass clippings and storage items away from the sides and top so air can move freely.
- Keep supply registers and return grilles open. Furniture and rugs over a vent starve a room of air.
- Look at the indoor unit for water. A damp spot below the air handler is a flag for the condensate drain.
- Notice and note changes. A new sound, longer run times or a house that takes longer to cool are worth writing down. See our guide to warning sounds and smells from your air conditioner for what they can mean.
Do not use a pressure washer on the outdoor coil, open the electrical panel or add refrigerant yourself. Those tasks need training and tools.
What happens when maintenance is skipped
The ENERGY STAR checklist explains the chain. A dirty filter and dirty coils make the system run longer to reach the same temperature. Longer run time means more wear and higher energy use. A drain that clogs can cause water damage. Loose electrical connections can lead to unsafe operation. A refrigerant level that has drifted lowers efficiency. Each problem is small at first and larger the longer it goes on.
That chain is why we frame maintenance as a way to keep a cooling system running the way it was built to, not as an extra. A system that gets attention before summer is more likely to run through the season without a surprise.
Questions worth asking at the end of a visit
You do not need technical knowledge to get value from a maintenance visit. A few plain questions help you leave with a clear picture of your system.
- What did you check, and what did you find?
- Was anything dirty, loose or worn, and what did you do about it?
- Is there anything you would watch over the coming season?
- How old is the equipment, and does anything about its condition worry you?
- What should I do between visits, and when should I call sooner?
The answers become your own record. Keep a note with the date, and compare it with the next visit. Over a few seasons, that history tells you whether the system is holding steady or slowly declining, which is useful when you decide between repairing and replacing. It also helps a new technician get up to speed quickly if the first one is not available.
How a Lubbock maintenance visit works
When you book through AC maintenance in Lubbock, here is how we approach it. We start by asking what you have noticed and what the system has done in the past. We then work through the checklist above. We tell you what we found as we go, answer questions and describe options for anything that needs attention. Then you decide.
A good maintenance relationship also gives you a place to start when something goes wrong. If a part needs repair, our AC repair services in Lubbock team can handle it. If your system is aging and repairs add up, ENERGY STAR advises considering replacement of an air conditioner older than 10 years, and says that an ENERGY STAR unit can save up to 20 percent on heating and cooling costs when installed correctly. We can talk through that choice with you when it comes up, and our AC installation and replacement in Lubbock page explains how that process works.
Why Lubbock owners should not wait for summer
Waiting for the first hot week to find out whether the system works is a risky plan. If a part needs replacing, it is better to learn that in mild weather, when you can plan around it, than on the hottest afternoon, when everyone else is calling too. Some problems develop slowly. A system that was fine last fall can have a clogged drain, a weakened motor or a dirty coil by spring, and none of those announce themselves.
Moisture is another reason. Our Lubbock hub page notes that water here carries a heavy mineral load. Scale builds up in fixtures and lines, and a drain line that sees mineral buildup is easier to clog. Checking the condensate drain each year is a small step that protects a ceiling or a floor.
What Lubbock customers say
Carlye H., a Lubbock customer, wrote in September 2026 that the team will “call before and give you a price estimate for your work and confirm the date and time you request.” For a maintenance visit, that kind of advance communication is exactly what you want.
Frequently asked questions about AC maintenance in Lubbock
When should I schedule AC maintenance?
In spring, before the cooling season begins. ENERGY STAR recommends servicing cooling in spring and heating in fall, because contractors get busy once summer and winter arrive.
How often should I change my filter?
Check it monthly, and replace it when it is dirty. ENERGY STAR advises monthly inspection and says a dirty filter raises energy costs and can lead to early equipment failure.
Can I clean the coils myself?
It is safer to leave coil cleaning to a technician. The coils are delicate, and cleaning the indoor coil means opening the air handler. You can, however, keep the area around the outdoor unit clear.
Is maintenance worth it if the system works fine?
A working system can still have a clogged drain, loose connections or a dirty coil. A tune-up finds those before they cause a failure. That is the point of maintenance.
What if my AC is already acting up?
Then call for repair. A tune-up is for prevention. If the system is not cooling, making noise or leaking, we will diagnose the problem first.
Book AC maintenance in Lubbock
Call (806) 787-2200 to schedule a visit. We are at 8215 Avenue D, Lubbock, TX 79404, and open 24/7. Learn more on our Lubbock location page.